Photo by ArtPhoto_studio
Concrete block machines are among the primary machinery used in the production of concrete blocks on-site in construction works. As one continues to work, the machine collects dust, debris, and hardened cement. All these components affect its ability and efficiency and the block’s quality.
Therefore, you need to clean these concrete block machines properly. Cleaning your concrete block machines ensures effective and efficient performance over time. How can I do it efficiently? No worries! We are here to guide you on cleaning concrete block machines. Here is what you need to do:
1. Safety First
Before starting the cleaning, put on personal protective equipment, such as gloves, safety goggles, and a dust mask. Handling concrete dust poses dangers, so appropriate protection should be worn.
2. Disconnect Power Supply
Always cut off the power supply to the block machine before cleaning. It will prevent unwanted activation when you begin cleaning. First, check if there is some power going around the machine.
3. Cleaning Loose Debris
Use a broom or brush to sweep debris, dust, and loose small particles from the machine. Pay special attention to areas where concrete dust accumulates, such as around the hopper, mold area, and conveyor belts. Dealing with hardened concrete on a cleaner surface will be much easier.
4. Water and Mild Detergent
A general cleanser combined with water is to be applied for general cleaning. Wet a sponge or a cloth with the solution and apply to wipe around all machine surfaces. It will clean all dirt stuck in this machine without damaging any constituent components. Clean external and internal parts accessible through casings.
You should learn: Everything You Need to Know About Shelter Mutual Insurance
5. Hardened Concrete
Hardened concrete is quite hard to scrape out. You might have to employ a chisel or putty knife to remove the concretion. Avoid overexertion, as that may damage the equipment. You may use a concrete dissolver or specialized removal material for the challenging parts for cured concrete. Moreover, when applying chemicals, always follow the manufacturer’s recommendations.
6. Comprehensive Cleaning of Molds
Molds are essential when forming concrete blocks. After all the concrete has drained off, apply the mold release agent so that it won’t stick in the future. It makes cleaning easy the next time and helps improve the quality of blocks produced.
7. Rinse well
Then, after cleaning the surfaces, rinse off any detergent or cleaning solution with clean water. It prevents residue left by the detergent/cleaning solution from interfering with the next batch of concrete produced.
8. Inspect and Maintain
First, clean it before investigating each part for signs of wear or damage. Carry out scheduled maintenance, which would comprise greasing all moving components to avoid breakdowns and ensure that the concrete block machine serves for a long time.
Take Away!
Cleaning concrete block machines is fundamental to ensuring operational efficiency and high output quality. The activities enumerated above should be included in your regular maintenance routine so you can always ensure top condition for your concrete block machine, which will, in return, produce higher-quality results and lower failure functions.
Leave a Reply